corsair hydro series h80i v2 cooling a i7 930 2.8 ghz cpu

To improve cooling performance over previous generations, the Hydro Series H100i and H80i coolers use new, more efficient copper cold plates, improved manifolds, optimized fan designs, and larger diameter tubing for increased coolant flow. The new H100i and H80i models have been enhanced to deliver improved cooling, quieter operation, simpler installation, and Corsair Link digital control. From there, proceed with your typical Hydro Series cooler installation (don't forget to plug in your power and USB cables).Corsair, the leading supplier of high-performance liquid CPU coolers for PC enthusiasts, today announced the Hydro Series H100i and H80i liquid CPU coolers, a ground-up re-design of the world's most popular, proven, and award-winning liquid CPU coolers, the H100 and H80.Replace the stock Intel bracket on your Hydro Series cooler with the AMD bracket provided in the kit.Insert the AM4 standoffs into the original AMD back plate, collared side down.Remove the stock AMD mounting clips from the front of your motherboard.Here is what’s included in the AM4 AMD Retention Bracket Kit:ĪMD AM4 Mounting Kit installation instructions: Older models are not compatible out-of-the-box, but you can use the following coolers with the AM4 socket if you also have the AM4 AMD Retention Bracket Kit: You can also check out our video on installing coolers: If you cannot find your product manual, you can use this manual for the H100i Platinum. If you want to see diagrams or more detailed installation instructions, consult your cooler product manual. Doing so will damage the retention hooks. Tighten the thumbscrews until the cooler is secure.Align your bracket with the stock AMD mounting clips and install the cooler by slipping the screw clip loops over the retention hooks.You need to have enough slack to get the screw clip loops over the retention hooks of the mounting clip. Do NOT tighten the thumbscrews all the way.Install the AMD screw clips into the bracket and secure them with the thumbscrews.Make sure the bracket is evenly secured on all sides before installing your cooler.Install the AMD bracket by pushing both sides into the slot on the pump.Remove the pre-installed Intel mounting bracket from the cooler.To mount your cooler using the AM4 socket: To install your cooler in an AM4 system, you will need the following hardware:

You do not need to use the AM4 AMD Retention Bracket Kit if you have one of the following coolers: Most new Corsair liquid coolers are compatible with AMD’s AM4 socket out-of-the-box.

Corsair hydro series h80i v2 cooling a i7 930 2.8 ghz cpu